 |
 |
 |
 |
 |
 |
 |
|
Your Location: Home > Multi-Cut |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Introducing the most versatile, productive solid carbide end mill ever made!Finally with one tool you can achieve the highest removal rates on a full range of materials. Multi-Cut can achieve material removal rates 5 to 10 times that of conventional end mills. With its progressive edge profile, variable helix and flute technology, Multi-Cut totally redefines high performance milling. But don't just take our word. Put it to the test yourself. If Multi-Cut doesn't out-perform your end mill by far, Emuge will refund your money. Multi-Cut Tools are made from select micro-grain carbide to provide maximum cutting performance and tool life. They feature variable flute spacing and pitch to minimize vibrations, even at high speeds and aggressive cutting depths. The unique chip-breaker technology provides optimum chip evacuation and a patented roughing profile enables short-duration chip contact. A flattened shank design ensures stability in tool clamping, for enhanced process safety. High Productivity Cutting ParametersUnder optimum operating conditions, Multi-Cut End Mills can remove material at an exceptional rate. To insure process safety, we recommend initial operational parameters using the low range speed and feed values shown in the chart below. Once stable cutting conditions are realized, both speed and feed values may be incrementally increased. At maximum speed, the chip load per tooth (fz) may be increased by up to 60% to achieve maximum material removal. Multi-UseMaterials and applications: Structural steels up to 44 HRC, stainless, cast iron, copper alloys, brass, bronze and titanium. |
 See Multi-Cut demo video.
|
| Catalog | Hardness | Material Examples | SFM Range | Factor for Inch Tools |
Factor for Metric Tools |
ap x d1 | ae x d1 | |
|---|---|---|---|---|---|---|---|---|
| 1.1 - 1.3 | ≤ 25 HRC | 1008 / 1010 / 1018 / 1045 / A36 / T1 / 12L14 |
525 - 660 | 200 | 5000 | 1.5 | 1 | Air / Cold air |
| 1.4 - 1.5 | ≤ 44 HRC | A2 / A7 / D2 / H13 / P20 / 4130 / 4140 / 8620 |
400 - 525 | 250 | 6500 | 1 | 1 | Air / Cold air |
| 1.10 | ≤ 25 HRC | 303SS / 304SS / 316SS / 416SS / 420SS |
260 - 330 | 250 | 6500 | 1 | 1 | Coolant |
| 1.11 | ≤ 35 HRC | 13-8PH / 15-5PH / 17-4PH | 150 - 210 | 275 | 6500 | 1 | 1 | Coolant |
| 2.1 - 2.2 | ≤ 280 BHN | ASTM A48 class 20 / 30 / 40 | 525 - 725 | 170 | 4500 | 1.5 | 1 | Air / Cold air |
| 2.3 - 2.4 | ≤ 280 BHN | ASTM A47 class 32510 / 35018 | 400 - 525 | 200 | 5000 | 1 | 1 | Air / Cold air |
| 3.1 - 3.3 | ≤ 150 BHN | Pure Copper / Cu Zn Alloys | 400 - 525 | 200 | 5000 | 1 | 1 | Coolant |
| 3.4 - 3.5 | ≤ 240 BHN | Copper Al Sn Alloys | 325 - 460 | 200 | 5000 | 1 | 1 | Coolant |
| 7.1 - 7.2 | ≤ 40 HRC | Pure Titanium / Ti Alloys / LAl4V |
200 - 260 | 330 | 8500 | 1 | 1 | Coolant |
Formula: Tool Diameter ∅d1 ÷ Factor (from chart) = fz (chip load per tooth)
Examples: 3/8" diameter in P20 (Material Group 1.4): .375 ÷ 250 = .0015" fz
12mm diameter in 1010 (Material Group 1.1): 12 ÷ 5000 = .0024" fz
| ∅d1 h11 |
l2 | l1 | d3 | l4 | ∅d2 h6 |
IA | Z (No./flutes) |
EDP No. | List Price | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
 |
1/8 | 3/16 | 2-1/2 | .118 | 7/8 | 3/8 | 9/16 | 3 | 2869A.0125 | $87.00 |
| 3/16 | 9/32 | 2-1/2 | .177 | 7/8 | 3/8 | 5/8 | 3 | 2869A.01875 | 84.00 | ||
| 1/4 | 3/8 | 2-1/2 | .236 | 7/8 | 3/8 | 3/4 | 4 | 2869A.0250 | 82.50 | ||
| 5/16 | 7/16 | 2-1/2 | .295 | 7/8 | 3/8 | 3/4 | 4 | 2869A.03125 | 81.00 | ||
| 3/8 | 9/16 | 2-1/2 | .358 | 7/8 | 3/8 | 7/8 | 4 | 2869A.0375 | 79.50 | ||
| 1/2 | 3/4 | 3 | .480 | 1-1/8 | 1/2 | 1-1/8 | 4 | 2869A.0500 | 110.25 | ||
| 5/8 | 7/8 | 3-1/2 | .605 | 1-1/2 | 5/8 | 1-1/2 | 4 | 2869A.0625 | 165.00 | ||
| 3/4 | 1-1/8 | 4 | .730 | 1-7/8 | 3/4 | 1-7/8 | 4 | 2869A.0750 | 210.00 | ||
| 1 | 1-1/2 | 5 | .969 | 2-5/8 | 1 | 2-5/8 | 5 | 2869A.1000 | 313.50 | ||
 |
|||||||||||
 |
1 | 1.5 | 38 | 0.9 | 5 | 3 | 9 | 3 | 2869A.001 | $72.00 | |
| 2 | 3 | 57 | 1.9 | 8 | 6 | 15 | 3 | 2869A.002 | 72.70 | ||
| 3 | 5 | 57 | 2.9 | 14 | 6 | 18 | 3 | 2869A.003 | 69.00 | ||
| 4 | 8 | 57 | 3.8 | 18 | 6 | 20 | 3 | 2869A.004 | 68.20 | ||
| 5 | 9 | 57 | 4.8 | 20 | 6 | 21 | 3 | 2869A.005 | 66.70 | ||
| 6 | 10 | 57 | 5.8 | 20 | 6 | 21 | 4 | 2869A.006 | 65.20 | ||
| 8 | 12 | 63 | 7.7 | 25 | 8 | 27 | 4 | 2869A.008 | 72.70 | ||
| 10 | 15 | 72 | 9.5 | 30 | 10 | 32 | 4 | 2869A.010 | 81.70 | ||
| 12 | 18 | 83 | 11.5 | 35 | 12 | 38 | 4 | 2869A.012 | 102.70 | ||
| 14 | 21 | 83 | 13.5 | 35 | 14 | 38 | 4 | 2869A.014 | 122.20 | ||
| 16 | 24 | 92 | 15.5 | 40 | 16 | 44 | 4 | 2869A.016 | 169.50 | ||
| 20 | 30 | 104 | 19.5 | 50 | 20 | 54 | 4 | 2869A.020 | 224.20 | ||
Prices and specifications are subject to change without notice.