|
|
|
Your Location: Home > News & Events > Carbide+ End Mills
Carbide+ End Mills
Eliminate the guesswork. Cut your material and cost like never before.
Make milling easier and more
productive with Emuge's complete
new line of end mills.
Pre-Engineered by application,
based on your work material and
machining process... the result of
continuous product development and
precision manufacturing technology
of the highest level.
The + is for increased efficiency.
Eliminating tool selection guesswork means significant gains
in performance, production
and quality.
- Produced from select sub-micro grain carbides
- Application-specific by substrate, geometry and coating
- Featuring TiAIN, TiB 2 and diamond coatings
- Over 1200 items including CBN and PCD tools, insert tools and tool holders
Over 1200 items
from stock,
inch and metric,
covering 14 major
applications and
processes
- Solid Carbide End Mills
- General Purpose
- 3 D Milling
- Aluminum
- Titanium
- Graphite
- Hard Milling
- CBN / PCD
- High Productivity Cutting
- HSS Roughing
- Carbide Insert Tooling
- Holders and Collets
- Shrink Fit and Accessories
- Technical Data
Solid Carbide End Mills
- A full range of solid carbide end mills,
precision-manufactured from select
sub micro-grain carbides, pre-engineered
with application-specific geometries and
dedicated coatings.
- For machining a wide range of
materials, including aluminum, titanium,
graphite, stainless steels and specialty
materials.
- Available in a variety of styles including:
flat end, ball nose and torus; with
2 to 16 flutes, and in lengths from stub
to extra long.
- Available in a wide range of sizes, from
1/64 to 1" and in metric sizes, from
.5 to 32mm.
|
CBN and PCD End Mills
- A full program of PCD tools, for
exceedingly long life and durability in
abrasive materials such as graphite, high
silicon content aluminum alloys, fiber-reinforced
plastic and MMC's.
- Designed with "coolant-thru" feature
for efficient evacuation of dust
and chips.
- Available in sizes for 3/16 to 1/2",and
metric sizes from 4 to 12mm.
- Also, a full line of CBN tools, for
efficient and cost effective machining
of hardened steel to 42 Rc, hard alloys,
hard castings, as well as Inconel,
Monel and Stellite.
- Also available in sizes for 3/16 to 1/2",
and metric sizes from 4 to 12mm.
|
Insert Tools
- A wide ranging program of metric insert
tools with screw mount, Weldon ® style
and arbor mount designs.
- Featuring rugged inserts, which are
thicker, more durable than any standard
competing inserts, including round
and IC styles.
|
- Available with a variety of coatings
including TiAlN, TiN, Tib 2 and diamond.
- Inserts are precision-ground on all sides
for increased tool life and unmatched
accuracy.
- Insert sizes from 6 to14mm and cutting
diameters from10 to125mm.
|
Time-S-Cut ™
- Due to progressive cutting geometry,
this indexable insert roughing tool
permits extreme chip loads of up to
.080" per tooth.
- Provides unmatched material
removal rates in aluminum, cast
and steel to 44Rc.
- Under optimum conditions, a
50% time savings over
conventional roughing methods
is easily achievable.
- Featuring a variety of designs, sizes
and inserts, Time-S-Cut provides
roughing results at finishing speeds.
|
|
Use the form below to request more information about Carbide+ End Mills.
Any items in bold
are required fields.
|
