Solid carbide machine taps provide high cutting capacity, long tool life, high accuracy, narrow dimensional tolerances, and good surface finish. They are recommended for use on CNC machining centers or when tapping high-alloyed materials.
|
|
Chamfer. Single-finishing tap with 5 threads chamfer. For blind hole threads with a short thread run-out, the tap can be provided with chamfer form C, and used as a finishing tap for cutting the thread run-out to the required length.
Geometry. For through and blind holes.
Material. Hard materials up to max. 63 Rc. |
|
|
Chamfer. 2-3 threads is standard.
Geometry. For through and blind holes.
Material. Tool steels 800-1500 N/mm2 tensile strength, castings GG10-GGG70, malleable cast iron, steel casting, and short chipping brass. |
|
|
Chamfer. 2-3 threads.
Geometry. For through and blind holes.
Material. Tool steels > 1000 N/mm2 tensile strength, abrasive materials, duro-plastic, titanium, Ampco, aluminum alloys up to an Si content of 12%, and short chipping brass. |
|
|
Chamfer. 2-3 threads.
Geometry. For blind holes.
Material. Steels up to 1200 N/mm2 tensile strength, aluminum alloys up to Si 12, gunmetal, speriodal-graphite iron, and malleable cast iron. |
|
|
Chamfer. 2-3 threads.
Geometry. For through and blind holes.
Material. All materials which can be cold-formed with a tensile strength > 1200 N/mm2. |
