|
Top-Cut Flyer
With one Emuge-Franken TOP-Cut End Mill, you can perform roughing and finishing operations, reducing the number of tools and changes.
Download this brochure (PDF, 2.4 MB)
|
|
TiNox-Cut End Mills (inch sizes)
Oct. 2012 - A new range of Emuge-Franken tools uniquely designed to bring the machining of materials such as inconel, titanium and stainless down to earth, so your productivity can soar.
Download this brochure (PDF, 1.3 MB)
|
|
MULTI-CUT High-Performance End Mills
Oct. 2012 - Multi-Cut Tools are made from select micro-grain carbide to provide maximum cutting performance and tool life. They feature variable flute spacing and pitch to minimize vibrations, even at high speeds and aggressive cutting depths.
Download this brochure (PDF, 3.3 MB)
|
|
TiNox-Cut End Mills (Inch & Metric Sizes)
Milling tools for INOX and difficult to cut materials.
Download this brochure (PDF, 20.1 MB)
|
 |
Tapered Ball Nose End Mills
Milling tools for the machining of impellers,
blisks, tire profiles and turbine blades
With the new series of tapered ball nose end mills, EMUGE introduces
a new tool generation for the professional machining of special
components
in the 3-axes sector and in the 5-axes-simultaneous sector.
The tools are tapered and have a highly accurate ball nose. This makes
it possible to completely machine components in milling operations.
Download this brochure (PDF, 1.6 MB)
|
 |
DENTAL - Milling Tools for the Dental Industry
Specialty milling tools for the dental industry. Applicable in both open and closed CAD/CAM process chains.
Download this brochure (PDF, 11.9 MB)
|
 |
MULTI-CUT™ Metric Chart
Built in 3 lengths and designed to maximum stability, the MULTI-Cut end mills open the way to a new degree of flexibility in roughing. With this tool concept you can cut stainless materials as well as long- and short-chipping steels. Hardened steels up to 42 HRC, cast iron and other materials like copper and bronze can also be reliably machined.
Download this brochure (PDF, 124 KB)
|
 |
Diamond - PCD - CBN
The steadily growing importance of graphite as a material for electrodes for sink-erosion (instead of copper and coppertungsten) created the need for new coatings. Graphite which is mainly machined by milling is extraordinarily abrasive, and requires the application of diamond coatings with the highest possible hardness for wear protection. Diamond coatings are also used for the machining of aluminium cast alloys with a high silicon percentage, e.g. 17%. For such applications, smooth and thick coating types are usually preferred.
Download this brochure (PDF, 912 KB)
|
 |
Alu-Cut
FRANKEN introduces the
new Alu-Jet-Cut line, a tool line of radically new solid carbide end mills for the large-volume machining of aluminium materials with a silicon content of up to 6%. Due to the combination of an optimum carbide substrate with a newly developed cutting geometry and optimized grinding processes, machining volumes which would have been considered impossible until now can be achieved with the Alu-Jet-Cut.
Download this brochure (PDF, 14.2 MB)
|
 |
Micro & Mini
A brochure featuring milling tools for micro machining.
Download this brochure (PDF, 5.8 MB)
|
 |
HPC, Time-S-Cut, Time-S4-Cut, HSC-Trace-Cut
A brochure featuring milling cutters with indexable or exchangeable inserts.
Download this brochure (PDF, 9.3 MB)
|
 |
MULTI-Jet-Cut Line, HPC-Jet-Cut Line
The product family MULTI-Jet-Cut line is the latest state of the art, and unites highest economic efficiency with a high degree of process safety. The tool families HPC-Jet-Cut line and HSC-Jet-Cut line are subject to continuous improvement and optimization.
Download this brochure (PDF, 1.6 MB)
|
 |
Form Milling Cutters for Specific Industries
Without precision tools, the world of production technology is hardly to be imagined. The incredibly high precision of modern tools has led to technical developments which have changed the world. Whoever wants to make things move in our modern world, whoever wants to be motor and driving power for innovation of any kind, must concentrate all his abilities on the best possible benefit of the customer.
Download this brochure (PDF, 8.3 MB)
|
 |
MULTI-Jet-Cut Duplex, HPC-Jet-Cut Duplex
With the Duplex tools, FRANKEN is treading new paths in milling. The term Duplex comes from Latin and means as much as "double" or "two-fold." With the FRANKEN Duplex tools, both meanings apply. They make it possible to do pocket and slot milling (2D) as well as complex 3D operations like copy and high-feed milling with only one tool. The Duplex series will reduce the number of tool places in your workshop!
Download this brochure (PDF, 2.8 MB)
|
 |
ENORM - The Milling Cutter for Roughing and Finishing
The Enorm end mill has been optimized for maximum fl exibility in machining. The irregular helix angles help minimizing vibrations. Even in the most diverse materials, the tough carbide substrate, in connection with a high-heat resistant wear protection coating will guarantee a high degree of process safety and long tool life.
Download this brochure (PDF, 6.2 MB)
|
