Hard-Cut

Torus / Long Length

The Hard-Cut Torus series of carbide end mills is specifically developed for machining hardened materials well suited for the die and mold industry and are manufactured with extremely tight tolerances.

  • Short, 2 flute length with 30˚ helix angle for rough and finishing up to 63 Rc
  • Straight 4 flute design for finishing operations up to 66 Rc
  • 6 & 8 flute designs for fine finishing in hardened materials 44-66 Rc
  • TIALN coated for heat and wear resistance
  • HA - cylindrical shanks

Torus / Long Length
Part Number Description Stock
USA
Stock
Germany
1993A.008 8 mm Hard-Cut -Torus -Lg -2 Flute  
1993A.010 10 mm Hard-Cut -Torus -Lg -2 Flute  
1993A.012 12 mm Hard-Cut --Torus -Lg -2 Flute  
1993A.016 16 mm Hard-Cut -Torus -Lg -2 Flute  
2807A.0005 0.5mm-End Mill - Hard-Cut - Torus - Rad 0.1  
2807A.001 1mm-End Mill - Hard-Cut - Torus - Rad 0.2
2807A.0015 1.5mm-End Mill - Hard-Cut - Torus - Rad 0.3
2807A.002 2mm-End Mill - Hard-Cut - Torus - Rad 0.4  
2807A.003 3mm-End Mill - Hard-Cut - Torus - Rad 0.5  
2807A.004 4mm-End Mill - Hard-Cut - Torus - Rad 0.6  
2807A.005 5mm-End Mill - Hard-Cut - Torus - Rad 0.8  
2807A.006 6mm-End Mill - Hard-Cut - Torus - Rad 1  
2807A.1005 0.5mm-End Mill - Hard-Cut - Torus - Rad 0.1  
2807A.101 1mm-End Mill - Hard-Cut - Torus - Rad 0.2  
2807A.1015 1.5mm-End Mill - Hard-Cut - Torus - Rad 0.3
2807A.102 2mm-End Mill - Hard-Cut - Torus - Rad 0.4  
2807A.103 3mm-End Mill - Hard-Cut - Torus - Rad 0.5  
2807A.104 4mm-End Mill - Hard-Cut - Torus - Rad 0.6  
2807A.105 5mm-End Mill - Hard-Cut - Torus - Rad 0.8  
2807A.106 6mm-End Mill - Hard-Cut - Torus - Rad 1