Jet-Cut

Corner Radius

Jet-Cut carbide end mills are designed to mill a wide range of materials with high performance milling feed rates.

  • Fully blended corner radius
  • Aggressive 50˚ helix angle with variable spacing
  • 2815A and 2814A series cutting face rake angle +10˚ for roughing/finishing up to 50 HRC
  • Tighter manufacturing tolerances on cutting diameter
  • TIALN coated for heat and wear resistance.
  • HB / Weldon flat options available
  • Suitable for steel, cast iron, aluminum and hard materials

Corner Radius
Part Number Description Stock
USA
Stock
Germany
2814A.003 3 mm End Mill- Jet-Cut - Rad 0.3 - HB  
2814A.004 4 mm End Mill- Jet-Cut - Rad 0.4 - HB  
2814A.005 5 mm End Mill- Jet-Cut - Rad 0.5 - HB  
2814A.006 6 mm End Mill- Jet-Cut - Rad 0.5 - HB  
2814A.008 8 mm End Mill- Jet-Cut - Rad 0.5 - HB  
2814A.010 10 mm End Mill- Jet-Cut - Rad 1.0 - HB
2814A.012 12 mm End Mill- Jet-Cut - Rad 1.0 - HB  
2814A.014 14 mm End Mill- Jet-Cut - Rad 1.0 - HB
2814A.016 16 mm End Mill- Jet-Cut - Rad 1.0 - HB
2814A.01875 3/16" End Mill- Jet-Cut - Rad 0.005 - HB    
2814A.020 20 mm End Mill- Jet-Cut - Rad 1.0 - HB
2814A.0250 1/4" End Mill- Jet-Cut - Rad 0.0078 - HB
 
2814A.03125 5/16" End Mill- Jet-Cut - Rad 0.0156 - HB    
2814A.0375 3/8" End Mill- Jet-Cut - Rad 0.025 - HB
 
2814A.0500 1/2" End Mill- Jet-Cut - Rad 0.0375 - HB
 
2814A.0625 5/8" End Mill- Jet-Cut - Rad 0.0437 - HB
2814A.0750 3/4" End Mill- Jet-Cut - Rad 0.05 - HB
2814A.1000 1" End Mill- Jet-Cut - Rad 0.05 - HB
2815A.003 3 mm End Mill- Jet-Cut - Rad 0.3
2815A.004 4 mm End Mill- Jet-Cut - Rad 0.4