Jet-Cut

High Tensile Design

Jet-Cut / High Tensile design carbide end mills are designed to mill materials up to 60 Rc including steel and case hardened steel, cast iron and short chipping materials with high performance milling feed rates.

  • Fully blended corner radius design
  • Aggressive 50˚ helix angle
  • Series 2850A and 2851A cutting face rake angle 0˚ for roughing or finishing up to 55 Rc
  • Series 1987A cutting face rake angle -10˚ for roughing up to 60 Rc
  • Tighter manufacturing tolerances on cutting diameter
  • TIALN coated for heat and wear resistance
  • HB / Weldon flat options available
  • Suitable for steel, cast iron, and hardened materials

 

High Tensile Design
Part Number Description Stock
USA
Stock
Germany
1987A.003 3mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.3
1987A.004 4mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.4  
1987A.005 5mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.5
1987A.006 6mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.5
1987A.008 8mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.5  
1987A.010 10mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.5
1987A.012 12mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 1
1987A.014 14mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 1
1987A.016 16mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 1
1987A.01875 3/16"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.005
 
1987A.020 20mm-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 1  
1987A.0250 1/4"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.0078
 
1987A.03125 5/16"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.0156
1987A.0375 3/8"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.025
 
1987A.04375 7/16"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.0315
1987A.0500 1/2"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.0375
 
1987A.0625 5/8"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.05
1987A.0750 3/4"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.05
1987A.1000 1"-End Mill - Jet-Cut -4 Flute-Neg Rake-Long - Rad 0.05
2850A.003 3 mm Jet-Cut - Corner Rad 0.3