Jet-Cut

Long Length

Jet-Cut carbide end mills are designed to mill a wide range of materials with high performance milling feed rates.

  • Vibration dampening variable flute spacing
  • Aggressive 50˚ helix angle
  • Series 1926A and 2820A cutting face rake angle +10˚ for roughing/finishing up to 50 Rc
  • For use in steels, copper alloys, cast iron, and hardened steels
  • Tighter manufacturing tolerances on cutting diameter
  • TIALN coated for heat and wear resistance.
  • HB / Weldon flat options available

Long Length
Part Number Description Stock
USA
Stock
Germany
1926A.003 3 mm End Mill- Jet-Cut - 4 Flt  
1926A.004 4 mm End Mill- Jet-Cut - 4 Flt  
1926A.005 5 mm End Mill- Jet-Cut - 4 Flt  
1926A.006 6 mm End Mill- Jet-Cut - 4 Flt  
1926A.008 8 mm End Mill- Jet-Cut - 4 Flt  
1926A.010 10 mm End Mill- Jet-Cut - 4 Flt  
1926A.012 12 mm End Mill- Jet-Cut - 4 Flt  
1926A.016 16 mm End Mill- Jet-Cut - 4 Flt
1926A.020 20 mm End Mill- Jet-Cut - 4 Flt  
1926A.0375 3/8" End Mill- Jet-Cut - 4 Flt
 
1926A.0500 1/2" End Mill- Jet-Cut - 4 Flt
1926A.0625 5/8" End Mill- Jet-Cut - 4 Flt
1926A.0750 3/4" End Mill- Jet-Cut - 4 Flt
 
2820A.003 3 mm End Mill- Jet-Cut - 4 Flt - HB  
2820A.004 4 mm End Mill- Jet-Cut - 4 Flt - HB  
2820A.005 5 mm End Mill- Jet-Cut - 4 Flt - HB  
2820A.006 6 mm End Mill- Jet-Cut - 4 Flt - HB  
2820A.008 8 mm End Mill- Jet-Cut - 4 Flt - HB  
2820A.010 10 mm End Mill- Jet-Cut - 4 Flt - HB  
2820A.012 12 mm End Mill- Jet-Cut - 4 Flt - HB