TiNox-Cut

Type N - Titanium - Corner Rad

The TiNox-Cut / Type N - 5 Flute series was especially developed for machining titanium alloys and is also suitable for stainless steel.

  • High performance tool for roughing and finishing operations
  • 5 flutes for higher feed rates and reduced vibration
  • Aggressive 38˚ helix angle
  • ALCR coating for heat and wear resistance
  • Raised land flute geometry for freer cutting action
  • Coolant fed (axial) design for efficient chip evacuation
  • Tool shanks are held to h6 tolerance
  • Available from stock with multiple corner radii per diameter

Type N - Titanium - Corner Rad
Part Number Description Stock
USA
Stock
Germany
2592LZ.006005 6 mm-End Mill - TiNox-Cut -5 Flute- Rad 0.5  
2592LZ.006010 6 mm-End Mill - TiNox-Cut -5 Flute- Rad 1.0  
2592LZ.008005 8 mm-End Mill - TiNox-Cut -5 Flute- Rad 0.5  
2592LZ.008010 8 mm-End Mill - TiNox-Cut -5 Flute- Rad 1.0  
2592LZ.008020 8 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.0  
2592LZ.010005 10 mm-End Mill - TiNox-Cut -5 Flute- Rad 0.5  
2592LZ.010010 10 mm-End Mill - TiNox-Cut -5 Flute- Rad 1.0
2592LZ.010020 10 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.0  
2592LZ.010025 10 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.5  
2592LZ.012010 12 mm-End Mill - TiNox-Cut -5 Flute- Rad 1.0  
2592LZ.012020 12 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.0  
2592LZ.012025 12 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.5  
2592LZ.012030 12 mm-End Mill - TiNox-Cut -5 Flute- Rad 3.0  
2592LZ.012040 12 mm-End Mill - TiNox-Cut -5 Flute- Rad 4.0  
2592LZ.016010 16 mm-End Mill - TiNox-Cut -5 Flute- Rad 1.0  
2592LZ.016020 16 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.0  
2592LZ.016025 16 mm-End Mill - TiNox-Cut -5 Flute- Rad 2.5  
2592LZ.016030 16 mm-End Mill - TiNox-Cut -5 Flute- Rad 3.0  
2592LZ.016040 16 mm-End Mill - TiNox-Cut -5 Flute- Rad 4.0  
2592LZ.020010 20 mm-End Mill - TiNox-Cut -5 Flute- Rad 1.0