TiNox-Cut

Type NF - Inconel - Coolant Fed

The TiNox-Cut NF series was especially developed for machining nickel based alloys and aerospace materials. The NF style is a semi-roughing profile end mill that provides maximum chip space with a 4 flute design. The cutting edge rake face and edge preparation is fine tuned for the challenges of milling nickel based alloys. Available in solid and coolant fed designs.

  • Vibration dampening with variable flute spacing
  • Aggressive 45˚ helix angle
  • Heat and wear resistant multi-layer TIN/TiAlN - PVD applied coating
  • Semi-finishing roughing flute profile for optimum performance
  • Tool shanks are held to h6 tolerance and have a roughened surface (non-polished) for greater gripping force
  • HB / Weldon flats available
  • High precision tool holders such as FPC holders or shrink fit designs are recommend for optimum performance
  • Coolant fed (axial) design for efficient chip evacuation

Type NF - Inconel - Coolant Fed
Part Number Description Stock
USA
Stock
Germany
2648TZ.0250 1/4" TiNox-CUT - Coolant - 4 Flute    
2648TZ.03125 5/16" TiNox-CUT - Coolant - 4 Flute  
2648TZ.0375 3/8" TiNox-CUT - Coolant - 4 Flute    
2648TZ.0500 1/2" TiNox-CUT - Coolant - 4 Flute    
2648TZ.0625 5/8" TiNox-CUT - Coolant - 4 Flute
 
2648TZ.0750 3/4" TiNox-CUT - Coolant - 4 Flute
 
2648TZ.1000 1" TiNox-CUT - Coolant - 4 Flute
 
2649TZ.0250 1/4" TiNox-CUT -Coolant -4 Flute - HB    
2649TZ.03125 5/16" TiNox-CUT -Coolant -4 Flute - HB
 
2649TZ.0375 3/8" TiNox-CUT -Coolant -4 Flute - HB
 
2649TZ.0500 1/2" TiNox-CUT -Coolant -4 Flute - HB
 
2649TZ.0625 5/8" TiNox-CUT -Coolant -4 Flute - HB
 
2649TZ.0750 3/4" TiNox-CUT -Coolant -4 Flute - HB
 
2649TZ.1000 1" TiNox-CUT -Coolant -4 Flute - HB