Trochoidal End Mills | 05/09/2017
Solid Carbide End Mills for Trochoidal Milling
Trochoidal
Advanced Milling Strategies
The Trochoidal end mill series was developed specifically for use in advanced milling strategies available in modern CAM software. This product range consists of sub-micro grain carbide end mills. Standard and long length rougher/finisher with flute length/diameter ratios of 2:1, 3:1, 4:1, and 5:1 are available for applications in a wide range of materials.
TINOX-CUT Characteristics:
- Optimized geometry for long chipping, tough materials i.e. nickel alloys, titanium, stainless steel
- Axial coolant feature
- 38/42˚ vibration dampening variable flute spacing
- High heat-resistant, PVD applied multi-layer TIN/TIALN coating
- Roughing/Finishing profile
- Staggered chip breaker geometry
JET-CUT Characteristics:
- Optimized geometry for steels and cast materials
- 38/42˚ vibration dampening variable flute spacing
- High heat-resistant, PVD applied mono-layer ALCR coating
- Roughing/Finishing profile
- Staggered chip breaker geometry
ADDITIONAL RESOURCES
-
-
EMUGE Circle Segment & Trochoidal Milling Strategies | 12/28/2016
A demonstration of EMUGE end mills in P20 tool steel using traditional and updated milling strategies. Finishing a surface with a standard ball end mill strategy and the new EMUGE Circle Segment strategy, showing a 90% cycle time decrease with an improved finish. Roughing a pocket with the standard Multi-Cut roughing strategy & a new Jet-Cut Trochoidal strategy with chip breaker. The Jet-Cut Trochoidal is used to finish both pockets. Roughing a pocket with a Top-Cut VAR with & without radial chip thinning.
-
MASTERCAM DYNAMIC Trochoidal Milling | 12/08/2016
This is Mastercam's dynamic toolpath, cutting A2 tool steel with an EMUGE 4XD 16mm Trochoidal series carbide end mill. The holder is an Emuge FPC chuck that is available with an anti-pullout pin-lock system. Cut on a Haas UMC 750 CNC machining center.
