MultiTAP™ Extra Length

Semi-Bottoming - UNC/UNF

MultiTAP will cut a wide range of material including carbon steel, steel alloys, stainless steel, aluminum and copper. This all purpose design is well suited to the job shop, short run tapping environment.

  • Extra length design for extended reach applications
  • 2B/3B class of fit tolerances
  • Form C (2-3 P) semi-bottoming chamfer length
  • NE2 Surface Treatment - Oxidation - In a special installation, the tools are exposed to hot steam. This leads to the formation of a dark oxide layer on the tool surface. This oxide layer protects the surface, and acts as a good carrier of lubricants. Cold welding which occurs especially with low-carbon, soft steels, can be prevented in this way.
  • DIN / ANSI taps made with Emuge’s trademark long shanks- DIN length for extra reach and ANSI shanks
  • Tap extenders are available if long shank taps are not an option. see example:

Semi-Bottoming - UNC/UNF
Part Number Description Stock
USA
Stock
Germany
BU783200.5005 #6-32 - MultiTAP Long Spiral Flute
 
BU783200.5006 #8-32 - MultiTAP Long Spiral Flute
 
BU783200.5007 #10-24 - MultiTAP Long Spiral Flute
 
BU783200.5009 1/4-20 - MultiTAP Long Spiral Flute
 
BU783200.5010 5/16-18 - MultiTAP Long Spiral Flute
 
BU783200.5011 3/8-16 - MultiTAP Long Spiral Flute
 
BU783200.5039 #6-40 - MultiTAP Long Spiral Flute
 
BU783200.5040 #8-36 - MultiTAP Long Spiral Flute
 
BU783200.5041 #10-32 - MultiTAP Long Spiral Flute
 
BU783200.5043 1/4-28 - MultiTAP Long Spiral Flute
 
BU783200.5044 5/16-24 - MultiTAP Long Spiral Flute
 
BU783200.5045 3/8-24 - MultiTAP Long Spiral Flute
 
CU783200.5012 7/16-14 - MultiTAP Long Spiral Flute
 
CU783200.5013 1/2-13 - MultiTAP Long Spiral Flute
 
CU783200.5015 5/8-11 - MultiTAP Long Spiral Flute
 
CU783200.5046 7/16-20 - MultiTAP Long Spiral Flute
 
CU783200.5047 1/2-20 - MultiTAP Long Spiral Flute
 
CU783200.5049 5/8-18 - MultiTAP Long Spiral Flute