MultiTAP™
Plug - Metric - NT2
MultiTAP will cut a wide range of material including carbon steel, steel alloys, stainless steel, aluminum and copper. This all purpose design is well suited to the job shop, short run tapping environment.
- 6H class of fit tolerances
- Form B (4-5 P) chamfer length
- NT2 nitride surface treatment for improved surface hardness - In a special installation, the tools are exposed to hot steam. This leads to the formation of a dark oxide layer on the tool surface. This oxide layer protects the surface, and acts as a good carrier of lubricants. Cold welding which occurs especially with low-carbon, soft steels, can be prevented in this way.
- DIN / ANSI taps made with Emuge’s trademark long shanks- DIN length for extra reach and ANSI shanks
| Part Number | Description |
Stock USA |
Stock Germany |
|---|---|---|---|
| BU497300.0040 | M4 x 0.7 - MultiTAP - Thru Hole - ANSI |
•
|
|
| BU497300.0050 | M5 x 0.8 - MultiTAP - Thru Hole - ANSI |
•
|
|
| BU497300.0060 | M6 x 1.0 - MultiTAP - Thru Hole - ANSI |
•
|
|
| BU497300.0080 | M8 x 1.25 - MultiTAP - Thru Hole - ANSI |
•
|
|
| BU497300.0100 | M10 x 1.5 - MultiTAP - Thru Hole - ANSI |
•
|
|
| CU497300.0112 | M12 x 1.75 - MultiTAP - Thru Hole - ANSI |
•
|
|
| CU497300.0116 | M16 x 2.0 - MultiTAP - Thru Hole - ANSI |
•
|
|
| CU497300.0118 | M18 x 2.5 - MultiTAP - Thru Hole - ANSI |
•
|
|
| CU497300.0120 | M20 x 2.5 - MultiTAP - Thru Hole - ANSI |
•
|
|
| CU497300.0124 | M24 x 3.0 - MultiTAP - Thru Hole - ANSI |
•
|