MultiTAP™
Plug - Metric - NT2: BU497300.0100
MultiTAP will cut a wide range of material including carbon steel, steel alloys, stainless steel, aluminum and copper. This all purpose design is well suited to the job shop, short run tapping environment.
- 6H class of fit tolerances
- Form B (4-5 P) chamfer length
- NT2 nitride surface treatment for improved surface hardness - In a special installation, the tools are exposed to hot steam. This leads to the formation of a dark oxide layer on the tool surface. This oxide layer protects the surface, and acts as a good carrier of lubricants. Cold welding which occurs especially with low-carbon, soft steels, can be prevented in this way.
- DIN / ANSI taps made with Emuge’s trademark long shanks- DIN length for extra reach and ANSI shanks
Specifications
| Part Number |
BU497300.0100 Alternative Part Numbers:
|
|---|---|
| Name | MultiTAP™ |
| Inventory |
USA - Yes
Germany - No |
| Description | M10 x 1.5 - MultiTAP - Thru Hole - ANSI |
| Size | M 10 |
| Pitch | 1.5 |
| Chamfer Form | B |
| Chamfer | 4 -5 P |
| Thread Standard | M |
| Thread Limit | ISO 2/6H |
| Type | MultiTAP |
| Coolant Fed | No |
| Coating | NT2 |
| Material | HSSE |
| Flutes | 3 |
| Flute / Helix Angle | 0° |
| Shank | 0.381" |
| Tap Square | 0.286" |
| Shank Tolerance | h9 |
| Overall Length | 3.937" |
| Thread Length | 22 mm |
| Flute Direction | Straight |
| Cutting Direction | RH |
| Dimension Standards | DIN/ANSI |