MultiTAP™

UNC/UNF - NE2

MultiTAP will cut a wide range of material including carbon steel, steel alloys, stainless steel, aluminum and copper. This all purpose design is well suited to the job shop, short run tapping environment.

  • 2B/3B class of fit tolerances
  • Form B (4-5 P) chamfer length
  • NE2 Surface Treatment - Oxidation - In a special installation, the tools are exposed to hot steam. This leads to the formation of a dark oxide layer on the tool surface. This oxide layer protects the surface, and acts as a good carrier of lubricants. Cold welding which occurs especially with low-carbon, soft steels, can be prevented in this way.
  • DIN / ANSI taps made with Emuge’s trademark long shanks- DIN length for extra reach and ANSI shanks

UNC/UNF - NE2
Part Number Description Stock
USA
Stock
Germany
BU497300.5003 #4-40- MultiTAP - Thru Hole - NE2
 
BU497300.5004 #5-40- MultiTAP - Thru Hole - NE2
 
BU497300.5005 #6-32- MultiTAP - Thru Hole - NE2
 
BU497300.5006 #8-32- MultiTAP - Thru Hole - NE2
 
BU497300.5007 #10-24- MultiTAP - Thru Hole - NE2
 
BU497300.5008 #12-24- MultiTAP - Thru Hole - NE2
 
BU497300.5009 1/4-20- MultiTAP - Thru Hole - NE2
 
BU497300.5010 5/16-18- MultiTAP - Thru Hole - NE2
 
BU497300.5011 3/8-16- MultiTAP - Thru Hole - NE2
 
BU497300.5037 #4-48- MultiTAP - Thru Hole - NE2
 
BU497300.5038 #5-44- MultiTAP - Thru Hole - NE2
 
BU497300.5039 #6-40- MultiTAP - Thru Hole - NE2
 
BU497300.5040 #8-36- MultiTAP - Thru Hole - NE2
 
BU497300.5041 #10-32- MultiTAP - Thru Hole - NE2
 
BU497300.5042 #12-28- MultiTAP - Thru Hole - NE2
 
BU497300.5043 1/4-28- MultiTAP - Thru Hole - NE2
 
BU497300.5044 5/16-24- MultiTAP - Thru Hole - NE2
 
BU497300.5045 3/8-24- MultiTAP - Thru Hole - NE2
 
CU497300.5012 7/16-14- MultiTAP - Thru Hole - NE2
 
CU497300.5013 1/2-13- MultiTAP - Thru Hole - NE2